Sludge Drying

HUBER Middle Temperature Dryer BT+
HUBER Solar Active Dryer SRT

Water evaporation requires 800 – 900 kWh/t heat. Little heat is recovered. Sludge dryers also consume power.

  • High-temperature dryers, such as drum, fluidized-bed or contact dryers, require high temperature heat, usually supplied as fossil fuel.
  • Medium-temperature dryers, such as our HUBER Belt Dryer BT+, are operated with waste heat. If it is supplied at a temperature of 80 – 90 °C, disinfection can be achieved.
  • Low-temperature dryers, such as our HUBER Solar Active Dryer SRT, have a large footprint, but need no or little heat.

 

Fossil fuel is far too expensive to be burned for sludge drying. If there is a lack of heat, it should be provided from a power-heat-cogeneration system, generating 0.6 kWh of power for every 1.0 kWh of heat. Since power is at least 3 times as expensive as heat, the benefit/cost-ratio is almost doubled.

Footprint and costs of solar dryers can by reduced by additional supply of low-temperature heat, e.g. recovered from effluent with a heat exchanger / heat pump. Heat pumps supply about 4 kW of heat per 1 kW of power.

https://www.huber.de//solutions/energy-efficiency/sludge-treatment/drying.html