Safety Climbing Systems
HUBER-safety climbing systems comply with regulations, standards and paragraphs.
Personal safety and safe investment!
Safety access ladder SiS 1close
Safety access ladder SiS 1
Completely made of stainless steel; available from stock (any length of 300 mm wide ladders, 1.17 m or longer 400 mm wide ladders)
Safety access ladder, RWTÜV design certification, in accordance with DIN EN 14396, DVGW 351, BGV D 36 „Leitern und Tritte“ (ladders and steps), made of 1.4301/1.4307 stainless steel.
Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps. Rungs made of U-profile with perforated surface, 30 mm, slip resistance R 12, step height 280 mm, clear ladder width 300 mm (or 400 mm, 500 mm).
Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Types: Vertical installation - Angled, wall fixing - Angled, floor fixing
Safety access ladder with safety guard rail SiS 2close
Safety climbing tree with guard rail SiS 3close
Safety rail for manholes with step iron SiS 4close
Safety rail for manholes with step iron SiS 4
Completely made of stainless steel
Retrofitting of pole step corridors or ladders with fall arrestors allows for cost-effective and regulation refurbishing
Fall arrester S5cclose
Fall arrester S5c

Self-revolving fall arrester in compliance with DIN EN 353-1:2014 and CNB/P/11.073. Fits for Safety access ladder with guard rail SiS 2, safety climbing tree with guard rail SiS 3 and safety rail for manholes SiS 4.
Boot scraper SiS 4 FKclose
Boot scraper SiS 4 FK
Completely stainless steel, available from stock
Boot scraper, 1.4301/1.4307 stainless steel. Designed for bolted fixing.
Floor or wall installation.
Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Embedded step pockets SiS 6 SKclose
Embedded step pockets SiS 6 SK
Completely stainless steel, available from stock
Embedded step pockets, 1.4301/1.4307 stainless steel.
Consisting of a chamfered stainless steel plate, 1.5 mm thick. U-profile with perforated surface (30 mm). Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Step irons SiS 6 SEclose
Step irons SiS 6 SE
Completely stainless steel, available from stock
Safety step irons, with BG test certificate, completely made from 1.4301 stainless steel.
Consisting of chamfered stainless steel plates, with welded U-section with perforated surface (30 mm). Tread depth 162.5 mm (in accordance with UVV and GUV), width 380 mm, with 2 holes for bolted fixing. Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Alternative: width 200 mm
Floating safety access ladder SiS 7close
Floating safety access ladder SiS 7
Completely made of stainless steel
Floating safety access ladder, in accordance with DIN 14396, DVGW 351, BGV D 36 „Leitern und Tritte“ (ladders and steps), made of 1.4301/1.4307 stainless steel.
Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps.
Rungs made of U-profile with perforated surface, 30 mm, slip resistance R 12, step height 280 mm, clear ladder width 300 mm (or 400 mm, 500 mm), with upper pivot bearing and stainless steel float.
Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Spars and rung profiles are not polluted as they are floatable -> safety for the user